Husqvarna PZT54
The Husqvarna P-ZT54 offers commercial quality at an unbeatable value. Born and bred from the top of the line, the P-ZT54 does not hold back on durability, reliability, and performance. This new work horse borrows key attributes from the PZ series like the commercial duty chassis, heavy-duty front casters, convenient and comfortable operator interface and a clean open design for unparalleled service access. All these features combine to offer one high value, solid commercial performance package.
Kawasaki, FX Series, 18.3 kW @ 3600 rpm, 54 inch / 137.2 cm
-
Kawasaki engines offer smooth, quiet, reliable power. Heavy-duty components offer long life and electric start is standard.
-
Hydro-Gear's ZT3400 series commercial transmissions are fully serviceable and offer higher ground speeds with smooth performance.
-
The chassis is constructed of 2” x 3” steel tube with 11 gauge wall thickness for superior strength and durability. The open design also allows for more convenient servicing and reduced debris buildup.
-
The heavy-duty canister air filter provides maximum protection for the engine in tough mowing conditions.
-
The rugged blade spindle assembly features cast aluminum construction and greasable tapered bearings.
-
The practical foldable ROPS protects the user and can be lowered in areas with low-hanging branches.
-
Low centre of gravity and wide stance ensure exceptional stability and riding comfort. Wide tyres reduce grass compaction.
-
Oil and filter maintenance, hydraulic drive system components/adjustment, electrical system and battery are all within easy reach so you can quickly get back to being productive.
- Zero-turn steering system
- 10 gauge steel deck
- Tough caster assembly
- Adjustable steering levers
- Removable foot pan
- Hour meter with service minder
- Adjustable tracking
- Premium seat
- Easy height control
| Engine manufacturer | Kawasaki |
|---|---|
| Engine name | FX Series |
| Net power at preset rpm | 18.3 kW @ 3600 rpm |
| Cylinder displacement | 44.3 cu.inch / 726 cm³ |
| Cylinders | 2 |
| Engine cooling | Air |
| Air Filter type | Heavy-Duty Canister Style |
| Fuel Type | Gasoline |
| Fuel tank volume | 11 gal. / 41.6 lit |
| Fuel tank location | Side (Dual) |
| Engine lubrication type | Full pressure |
| Oil capacity | 70.4 fl oz / 2.1 lit |
| Oil filter |  |
| Transmission type | Hydrostatic |
|---|---|
| Transmission manufacturer | Hydro-Gear |
| Transmission model | ZT 3400 |
| Pump displacement | 12 cm³ |
| Fan-cooled pumps | |
| Speed forward, min-max | 0-10 mph / 0-16.1 km/h |
| Speed reverse, min-max | 0-5 mph / 0-8 km/h |
| Cutting width | 54 inch / 137.2 cm |
|---|---|
| Cutting deck type | Fabricated flat |
| Cutting methods | Collect/Mulch/Side ejection |
| Cutting deck material | Steel |
| Deck thickness | 10 gauge / 3.6 mm |
| Cutting height, min-max | 1.5 - 5.5 inch / 38.1 - 139.7 mm |
| Cutting height steps | 17 |
| Blade engagement | Electric clutch |
| Clutch rating | 150 ft.lb / 203.4 Nm |
| Blades | 3 |
| Blade-tip speed | 18500 fpm / 93.9 m/s |
| Anti-scalp wheels | 2 |
| Deck lifting system | Manual, foot activated |
| Powder-coated cutting deck | |
| Spindle/mandrel type | Aluminium, commercial |
| Greasable mandrels | |
| ROPS | |
|---|---|
| Seat type | Premium |
| Seat material | Vinyl |
| Seat spring | |
| Seat back height | High |
| Armrests | |
| Hour meter | Digital with pre-programmed service intervals |
| Cup holder | |
| Tyre size, front | 13x6.5-5" |
|---|---|
| Tyre size, rear | 23x10.5-12" |
| Wheelbase | 51 " / 129.5 cm |
| Base machine, length | 81 inch / 205.7 cm |
| Base machine, width (chute down) | 65.5 inch / 166.4 cm |
| Base machine, width (chute up) | 53.5 inch / 135.9 cm |
| Base machine, height (ROPS down) | 46 inch / 116.8 cm |
| Base machine, height (ROPS up) | 72.5 inch / 184.2 cm |
| Weight | 1070 lbs / 485.4 kg |
| Productivity | 4.2 acres/hr / 16996.8 m²/h |
|---|
| Homeowner Warranty | N/A |
|---|---|
| Commercial Warranty | 2 Year Limited |
