Performance and style hit the grass running with the all new Z200 Series Zero Turn Mowers. Cutting edge design, proven performance and new innovative features combine to make lawn maintenance an event instead of a chore.
Briggs & Stratton, Endurance Series V-Twin, 24 hp, 54 inch / 137.16 cm
SmartSwitch ignition offers the convenience and security of "key-less" starting and operator feedback on safety sytems, as well as one touch battery charge status and headlight operation.
Individual, hydraulic wheel-drive provides very precise manoeuvring and allows the mower to rotate around its own axis. The result is increased productivity.
Powered by Briggs and Stratton, this engine features premium air filtration, chrome plated valves, super finished bearing surfaces, and an oversized cooling fan for extreme durability and superior performance.
Our innovative Air Induction mowing system draws clean air from the top and bottom of the deck, enhancing air flow which results in greater grass lift and superior cut.
The stamped cutting deck is reinforced with heavy flat-stock steel for added strength and durability on the leading edge and trim side. (Z254 shown)
Worry free performance with maintenance free, integrated zero-turn transmissions.
The robust frame and casters ensure durability and reduced chassis flex.
The deck lift system is spring assisted for ease of use and conveniently located within easy reach of the operator.
|Engine manufacturer||Briggs & Stratton|
|Engine name||Endurance Series V-Twin|
|Cylinder displacement||44.18 cu.inch / 724 cm³|
|Fuel tank volume||3.5 gal. / 13.25 lit|
|Fuel tank location||Side (Single)|
|Speed forward, min-max||0-6.5 mph / 0-10.46 km/h|
|Cutting width||54 inch / 137.16 cm|
|Cutting deck type||Stamped, Reinforced|
|Cutting methods||3-in-1 Mulch/Rear Bag/Side Discharge Capable|
|Cutting deck material||Steel|
|Deck thickness||12 gauge / 2.7 mm|
|Cutting height, min-max||1.5 - 4 inch / 38.1 - 101.6 mm|
|Blade engagement||Electric clutch|
|Blade-tip speed||18500 fpm / 93.98 m/s|
|Deck lifting system||Manual, hand operated|
|Spindle/mandrel type||Cast Aluminum|
|Deck Wash Port|
|Seat type||15" high back|
|Hour meter||Digital with pre-programmed service intervals|
|Tyre size, front||11x6-5"|
|Tyre size, rear||18x9.5-8"|
|Weight||640 lbs / 290.3 kg|
|Productivity||2.8 acres/hr / 11331.19 m²/h|